Month: November 2022

Ryan Maifield Joins Tekno RC

Tekno RC is pleased to welcome Ryan Maifield to the factory team. Ryan is well known in RC racing as his long list of achievements speaks for itself. From the many world and national championships, to the dozens and dozens of major event wins, he has proven time and again why he is considered to be one of the best drivers to ever compete in RC.

Ryan has incredible talent, vast knowledge of RC cars, and a large network of sponsors and fans who support him. Combined with his unique approach to racing, he has a competitive edge that fuels his strong desire to win. Like many of the greats, he is well-versed in 1/8th and 1/10th scale off-road racing disciplines. We’ll be working closely with him to refine our current products and to develop new vehicles for our valued customers to enjoy.

We can’t help but be excited for the 2023 racing season!!

Here’s a short statement from Ryan: “I’m excited to be a part of the Tekno program!! I have driven the vehicles and have been very impressed with the speed, adjustability, and quality of the products. After spending some time with the crew behind the scenes, I was able to see how much commitment and passion goes into these vehicles.”

Hobbywing QuicRun Fusion SE

Hobbywing QuicRun Fusion SE 1/10 Crawler brushless motor, Aesthetically Appealing Industry Design, integrated space-saving for builders. With a 58mm length, the Fusion SE has been shortened slightly to allow it to fit into more vehicles.

FOC has been a game changer for the crawling segm ent. The extreme efficiency operates at lower temps and provides extended runtimes. The nearly silent operation provides amazing power and response at all speeds while providing extremely low RPM control. Compared to normal brushless, FOC systems provide a dramatic increase in response and power delivery.

The smart torque output control feature of the built-in FOC ESC ensures unmatched downhill and uphill driving. The ESC can automatically adjust the motor output to RPM to match the driver inputs. Intelligent Torque Output is a smart management system that allows the ESC to adjust the motor for inclines or descent under any load to match the throttle.

QuicRun Fusion SE with 8 levels of drag brake force (Power, and g levels of Drag Brake Rate, drivers can fine-tunditheir vehicle’s hill-holding power and general driving. Overall, drag brakes can be 2 times stronger than normal brushless setups.

Designed for Durability, Silicon rubber gaskets, electronic buttons, and quality hardware ensure a long life for the Fusion SE. Made to take the abuse and conditions of daily RC bashers.

IP-67 waterproof rating ensures the Fusion SE has protection from water, dust, and about anything else that gets thrown at it. Designed to withstand all conditions time and time again.

David Ronnefalk Join CORSATEC

Having collected already numerous titles in a very short time, EFRA European Champion, 2nd at the IFMAR World Championship, a win at the DNC to name a few, CORSATEC is delighted to make it official announcing David Ronnefalk as their star driver in this newly formed team. Having proved the excellent quality and performance of our products we are looking forward to more success and great moments with David.

DAVID RONNEFALK: It’s well known by now that I partnered up with CORSATEC from the start. Having worked with the people behind the newly established company for a long time already, the relationship has always been great and there was no doubt I wanted to be a part of this new journey. During the year we have been working hard to bring you quality products and I’m confident to say that we have achieved this. It’s been a long process, but the wait has been worth it, trust me! Looking forward to see and hear about what people have to say when they get to test the products for themselves.

Bittydesign AR8-GT3 body shell for 1/10 190mm touring car

Bittydesign’s AR8-GT3 is style and performance for all the 1/10 190mm electric model. This project was born from the desire to offer enthusiasts from all over the world a body shell that could best combine the performance with the realism of a real GT3 racing supercar.

The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race.

· Made with high quality and genuine polycarbonate Lexan®
· Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
· Produced only in Light Weight version
· Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
· Sold clear with protective film outside
· Included in the package a decal sheet pre-cut and windows mask

The shapes inspired by a GT3 racing car have been adapted to the proportions and measures necessary for use with the 190mm electric models; the design phase took several months to finish every single particular, the attention to detail was obsessive in order to propose a body that could optimize aerodynamics and at the same time remain real in its proportions and aesthetics.

FMS 1/10 Mashigan BORN ADVENTURER

FMS/ROCHOBBY introduces the 1/10 Mashigan, which is the FIRST 1/10 scale Crawler from FMS.

For adventurers, the road ahead is always rough and full of thorns, but whether there is a road or no road, this 1/10 Mashigan’s 1.9 inch climbing tires can give you confidence, and meanwhile, the four-link suspension system gives you a guarantee of strong power, the metal trapezoidal beams provide you with a solid supportive structure. Even with a hard plastic car shell with a complete interior, Mashigan can easily overcome extreme road conditions. The real first-generation model uses leaf spring suspension, and adventurers will not ignore the history, the chassis can be installed with leaf spring suspension (sold separately) to restore the style of the first generation model. Pursuing the needs of climbing performance and restoration seems to be impossible, but through the compatible design of the chassis and the replacement of a few accessories, it can show a completely different shape. Two postures, and double the fun.

The exquisite interior and four-door full-opening design double the level of detail of this hard-shell RC model, which can be viewed statically or operated indoors. With climbing-level sturdy chassis and suspension system, FMS 1:10 Mashigan make it cool to go wild!

Features:

  • READY SET
  • BALL BEARINGS FULL SET
  • POLYSTYRENE BODY
  • NICE PAINTED BODY
  • HOOD CAN BE OPENED
  • BOTH SIDE DOORS CAN BE OPENED
  • TAILGATE CAN BE OPENED
  • SUPER EXQUISITE INTERIOR
  • SOFT RUBBER SEAT
  • NYLON ROLL CAGE
  • STEEL C-CHANNEL FRAME
  • FOUR LINK SUSPENSION
  • LEAF SPRING SUSPENSION(SOLD SEPARATELY)
  • 1.9-inch AT TIRE
  • 35t 550 MOTOR

What’s in the box:

1 x 1:10 Mashigan RS
1 x 2.4GHz Radio
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 550 Brushed Motor (installed)
1 x 9g Plastic Digital Servo (installed)
1 x 15kg Metal Digital Servo(installed)
1 x Product Manual

Specification:

  • Radio Control: 160 x 193 x 97mm, 221g (Battery not Included)
  • Model Vehicle: 546 x 274 x 282mm, 4kg (Battery not Included)
  • Tire: D:115mm, W:30mm
  • Wheel Base: 330mm
  • Ground Clearance: 82mm
  • Approach Angle: 68°
  • Departure Angle: 47°
  • Driving Speed: 15km/h Max
  • Remote Distance: 80m
  • Play Time: 20 minute

Hobbywing TUNALYZER

The next-generation tool for motor testing and tuning, Hobbywing Tunalyzer has an internal voltage regulator to allow repeated tests at the same voltage as the battery pack discharges. The Tunalyzer allows you to run auto-testing modes to provide quick and easy tests. This allows testing to be done on several motors for direct comparisons. Ultra crisp and clear full-color touch display allow for an extremely quick and easy-to-learn interface. Easy to read and use. Sensorless and Sensor motors can be tested. Virtually any pole count or style of a brushless motor can be tested with the Tunalyzer. Built-in reverse polarity protection circuit. Equipment will not be damaged by an incorrect battery connection.

Orlandoo-Hunter 1/32 RWD Micro Roll Cage Trophy Truck

Orlanddoo-Hunter released Brand NEW Micro R/C Car. 0.8mm thick soft shell, red, blue and transparent three optional. High strength PC material integrated pipe frame body. Front double fork arm coil spring independent suspension and Rear closed cutter arm four link integral bridge structure. Each wheel is equipped with two shock absorbers, imitation damping internal spring shock absorbers and external coil spring shock absorbers. Front and rear embedded anti-tilt bars Fire extinguisher, oil drum, fan, dashboard and other decorative parts.