Tag: Bittydesign

Bittydesign (BD) has officially released a newly licensed rally car body shell, specifically designed for RC rally enthusiasts. We are excited to welcome the ŠKODA Fabia RS Rally2 1/10 scale body shell to the BD product lineup! This universal body shell is compatible with all 1/10 scale chassis with a width of 190mm and a wheelbase of 257-258mm, whether it’s a touring car chassis or one specifically designed for rally racing. It is especially well-suited for the popular Tamiya TT-02 chassis (all versions). This body shell is officially licensed by ŠKODA Auto a.s., and BD offers it in two thickness options: 0.8mm (lightweight) and 1.2mm (hard).

The body shell comes clear and unpainted, with a protective film on the outside. The package includes pre-cut decals and window masking. The ŠKODA body shell kit also contains a set of small screws, nuts, and washers for securely attaching the pre-cut rear wing. We recommend using rally tires with a diameter of 68mm, as shown in the photos, to ensure the optimal height between the body shell and the ground. Product number: BDRX-190FRS.

P-GT3R is designed to fit the ARRMA® Infraction™ V2 chassis. Also compatible for *Limitless™ model. Iconic shapes and a racing look, with Bittydesign P-GT3R body the 1/7 model will look more aggressive and racer than ever before, ready to bite the asphalt and hurtle at full speed?

To allow artists who are passionate about painting, amateurs or professionals alike, to draft your graphics before moving on to airbrushing, Bittydesign 𝗽𝗿𝗼𝘃𝗶𝗱𝗲 𝘁𝗵𝗲 𝗕𝗹𝘂𝗲 𝗣𝗿𝗶𝗻𝘁𝘀 𝗼𝗳 𝘁𝗵𝗲 𝗲𝗽𝘁𝗿𝗼𝗻 𝗯𝗼𝗱𝘆 𝘀𝗵𝗲𝗹𝗹, you can easily print them on A4 paper and draft the graphics to be created for your personal use or send a preview of the design to your customers. Not only we are a rc bodies manufacturer but we are also professional artists and therefore Bittydesign wanted to think of those like us who will have to paint our new amazing eptron body, have fun and take advantage of these templates!

This project was born from the desire to develop a completely different body shell from Bittydesign previous models, the front, the sides, the trunk, the cockpit, the spoiler and the rear, everything has been redesigned from scratch to meet the needs of this ultra competitive category where performance matters more than anything else.

Product Features
The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race
Made with high quality and genuine polycarbonate Lexan®
Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
Produced in Light Weight version as well also Ultra Lite (ULT)
Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
Sold clear with protective film outside
Included in the package a decal sheet pre-cut and windows mask

Made with one target: the performance, The eptron body shell allows you to force the pace on medium/high grip surfaces while maintaining a constant pace for all 5 minutes; the speed that the model maintains when cornering is surprising and this allows an improvement both in your best lap and in the total time of your qualification or final.

Eptron is a touring body with a modern look and that responds to market demand, in the course of several months of tests on the track, changes were made several times to the original project as we wanted to be sure to offer a product that could excel in the 190mm category, step by step we have reached an optimal level of performance and balance.

Bittydesign (BD) release one more new body shell for the ARRMA on-road models cars, after the big success of the previous models launched during this year today BD are ready for the launch of another masterpiece body designed for the Infraction V2 1/7 scale chassis made by Arrma RC.

The AR8-GT3 project was born from the desire to create an extraordinary product developed specifically for ARRMA. AR8-GT3 is a stunning looking GT body designed to push your 1/7 model to the limit, whether you want to test top speed on the straight or drifting with your rc mate in the parking lot behind your house.

Product Features, The body shell has been designed to fit the ARRMA® Infraction™ V2 chassis. Also compatible for *Limitless™ model. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick. Included the lexan wing + plastic supports and the hardware (screw, nuts and large plastic washers) to fix properly these parts. Specs: length 690mm, width 310mm, height 175mm,Wheelbase: 406mm (with ARRMA dBoots® Hoons™ wheels).

Bittydesign’s AR8-GT3 is style and performance for all the 1/10 190mm electric model. This project was born from the desire to offer enthusiasts from all over the world a body shell that could best combine the performance with the realism of a real GT3 racing supercar.

The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race.

· Made with high quality and genuine polycarbonate Lexan®
· Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
· Produced only in Light Weight version
· Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
· Sold clear with protective film outside
· Included in the package a decal sheet pre-cut and windows mask

The shapes inspired by a GT3 racing car have been adapted to the proportions and measures necessary for use with the 190mm electric models; the design phase took several months to finish every single particular, the attention to detail was obsessive in order to propose a body that could optimize aerodynamics and at the same time remain real in its proportions and aesthetics.

The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S chassis No Prep Drag, Traxxas Slash 2wd Drag Car & Traxxas Drag Slash 1/10.

Making reference to one of the most iconic american supercar ever made, Bittydesign (BD) took inspiration to design the lines of the VPR body shell adapted to the production needs, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to offer a product that respect BD standards of quality and excellence.

VPR is a body shell with a breathtaking look designed for drag races, the look and its real shapes have been developed in compliance with the rules for the No Prep “Street” category. Accessories that make the difference! During the design BD have thought of every possible detail and this has led us to produce a few parts that complete the racing look of the VPR and aid in performance. Rear spoiler (extension) to improve and “clean” the air turbulence generated in the rear; this part is included together with the body shell Rear huge GT wing (#BDDG-VPRW) to reproduce the exact style of the 1:1 scale GT car, this part is sold apart as optional.