HB Racing D4 EVO3 1/10 COMPETITION ELECTRIC BUGGY 4WD

New from HB Racing is the D4 Evo3 1/10 scale 4WD electric buggy. HB designer Torrance Deguzman updated his innovative D418 design with new high performance features aimed to optimize performance on carpet and high grip race tracks. The D4 Evo3 includes a new chassis that moves the motor forward for improved weight balance, new gearboxes to allow lower ride height without compromising the suspension geometry, a lowered carbon fiber front shock tower, and E8 style chassis braces/rods that allow side flex while maintaining bending stiffness. Also included are DCJ (Dual Cardan Joint) front universals to eliminate front wheel chatter, machined aluminum front caster blocks, and new fully adjustable machined aluminum rear hub carriers. The D4 Evo3 is faster, stronger, and more adjustable…

New TRX-4 High Trail from Traxxas

The Traxxas lineup of exciting and capable High Trail TRX-4® models is expanding with the all-new 1979 Ford® F-150® truck. Sporting top-of-the-line Ranger XLT trim, the Ford F-150 High Trail is equipped with a factory-installed Long Arm Lift Kit and stands over an inch taller than our standard height TRX-4. The exceptional all-terrain capability, smooth running drivetrain, and Traxxas Tough® durability drivers expect from TRX-4 are all there. Black roll bar, chrome light housings, longer wheelbase, and slotted aluminum-finish mags complete the authentic, period correct look.

Tekno RC SCT410SL 1/10 4×4 Lightweight Short Course Truck

New SCT410SL 1/10th 4×4 Lightweight Short Course Truck Kit From Tekno RC!

Tekno RC is proud to announce the release of its latest addition to the short course racing class: the SCT410SL. This highly anticipated vehicle has been in testing and development for more than two years, and has been tested on tracks throughout the United States to ensure that it meets the high standards set by Tekno RC. The SCT410SL is not a replacement for our wildly popular SCT410.3 short course truck, which has been a favorite among racers and RC enthusiasts for almost eight years. Instead, the SCT410SL is a lightweight alternative to the SCT410.3 and is designed for use on racetracks where enhanced agility and a lighter vehicle are advantageous.

In addition to great performance, the SCT410SL is less expensive for racers looking for a lightweight short course vehicle. Customers previously had to purchase an ET410.2 1/10th scale truck and then spend hundreds of dollars on additional parts to convert it to a short course truck, whereas the SCT410SL includes all required parts.

This new truck features a 4mm CNC machined black anodized long wear chassis with new nerf bars, stronger hardened steel stub axles with M5 nuts, front and rear 7075 aluminum camber plates, and new black anodized tapered driveshafts. The 13mm big bore shocks are fully adjustable and there are a few new spring options as well. A new CNC 7075 one-piece motor mount with preset gearing options keeps things simple while ensuring your mesh stays consistent run after run. The SCT410SL also includes new front and rear chassis brace sets, light weight bumpers, and new body mounts that bolt directly to the shock towers. The strong HD outdrives and diff couplers complete the durable design of the vehicle. These are just a few of the high quality components that make the SCT410SL extremely competitive in its class.

Tekno RC SCT410SL

Team Powers Radon Pro V5BT ESC

Hong kong Team Powers released the Radon Pro V5BT(2S) Speed Control/ESC (Ext. Blutooth Version).

Improvements based on Radon Pro V4.1:

Hardware:
* Change to 32-bit MCU with ultra-smooth, faster response with precise throttle and braking control. More top end power with the same item function setup when compared with Radon Pro V4.1.
* New PCB layout and new internal hardware design increase the heat dissipation and should be around 10’C lower than radon pro v4.1 working on the same condition. The speed control cooling fan can be removed when running small to medium track for modify/stock racing.
* Connect with external Bluetooth device for advanced programming and firmware update through the Mobile APPS. APPS will be available on both IOS and Android.
* Real Time Data Analysis through Mobile APPS(Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing)
* Built-in one touch On/Off switch and support external On/Off switch.

Software:
* It is a new developed software with more advanced item functions added. Each item have small step to fine tune.
* All update item functions information can be reviewed from the photos attached.