The Traxxas lineup of exciting and capable High Trail TRX-4® models is expanding with the all-new 1979 Ford® F-150® truck. Sporting top-of-the-line Ranger XLT trim, the Ford F-150 High Trail is equipped with a factory-installed Long Arm Lift Kit and stands over an inch taller than our standard height TRX-4. The exceptional all-terrain capability, smooth running drivetrain, and Traxxas Tough® durability drivers expect from TRX-4 are all there. Black roll bar, chrome light housings, longer wheelbase, and slotted aluminum-finish mags complete the authentic, period correct look.
Category: news
FMS 1/10 ATLAS R/C Crawler
FMS 1/10 ATLAS 4×4 Crawler, RS Edition.
Tekno RC SCT410SL 1/10 4×4 Lightweight Short Course Truck
New SCT410SL 1/10th 4×4 Lightweight Short Course Truck Kit From Tekno RC!
Tekno RC is proud to announce the release of its latest addition to the short course racing class: the SCT410SL. This highly anticipated vehicle has been in testing and development for more than two years, and has been tested on tracks throughout the United States to ensure that it meets the high standards set by Tekno RC. The SCT410SL is not a replacement for our wildly popular SCT410.3 short course truck, which has been a favorite among racers and RC enthusiasts for almost eight years. Instead, the SCT410SL is a lightweight alternative to the SCT410.3 and is designed for use on racetracks where enhanced agility and a lighter vehicle are advantageous.
In addition to great performance, the SCT410SL is less expensive for racers looking for a lightweight short course vehicle. Customers previously had to purchase an ET410.2 1/10th scale truck and then spend hundreds of dollars on additional parts to convert it to a short course truck, whereas the SCT410SL includes all required parts.
This new truck features a 4mm CNC machined black anodized long wear chassis with new nerf bars, stronger hardened steel stub axles with M5 nuts, front and rear 7075 aluminum camber plates, and new black anodized tapered driveshafts. The 13mm big bore shocks are fully adjustable and there are a few new spring options as well. A new CNC 7075 one-piece motor mount with preset gearing options keeps things simple while ensuring your mesh stays consistent run after run. The SCT410SL also includes new front and rear chassis brace sets, light weight bumpers, and new body mounts that bolt directly to the shock towers. The strong HD outdrives and diff couplers complete the durable design of the vehicle. These are just a few of the high quality components that make the SCT410SL extremely competitive in its class.
Dumbo RC X4FM(G) Receiver
Kaido House x MINI GT
Kaido House x MINI GT New 1/64 JDM diecast model car, theDatsun KAIDO Fairlady Z MOTUL Z V2(#KHMG036) and Datsun 510 Pro Street BRE510 V3(#KHMG052)。
Team Powers Radon Pro V5BT ESC
Hong kong Team Powers released the Radon Pro V5BT(2S) Speed Control/ESC (Ext. Blutooth Version).
Improvements based on Radon Pro V4.1:
Hardware:
* Change to 32-bit MCU with ultra-smooth, faster response with precise throttle and braking control. More top end power with the same item function setup when compared with Radon Pro V4.1.
* New PCB layout and new internal hardware design increase the heat dissipation and should be around 10’C lower than radon pro v4.1 working on the same condition. The speed control cooling fan can be removed when running small to medium track for modify/stock racing.
* Connect with external Bluetooth device for advanced programming and firmware update through the Mobile APPS. APPS will be available on both IOS and Android.
* Real Time Data Analysis through Mobile APPS(Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing)
* Built-in one touch On/Off switch and support external On/Off switch.
Software:
* It is a new developed software with more advanced item functions added. Each item have small step to fine tune.
* All update item functions information can be reviewed from the photos attached.
New Pickup body from RCDream/GRC
RCDream/GRC released the RD110 pickup truck body, wheelbase 324mm, fit for Traxxas TRX-4.
Blackout Crawler | Traxxas TRX-4 Land Rover Defender
The Traxxas TRX-4 Land Rover Defender paved the way for Scale and Trail® capability and unmatched scale detail.
Spektrum XT2000 Tire Warmer
The Spektrum RC Tire Warmer System is a must have for serious 1/10, 1/8 racers and Drag Racers looking for a competitive edge. Featuring full coverage tire wraps inspired by F1 racing that keep your tires at a race ready temperature between heats.
Kyosho Dirt Master 1/10 2WD Buggy
Developed as a ‘neo-retro’ model, the Kyosho “Dirt master” combines modern chassis design with traditional features. Breathtaking performance powers you over any low-grip surface from vacant lots to full-scale racing circuits. For your first Kyosho buggy, this is the one!
Brand new 1/10 Scale Radio Controlled Electric Powered 2WD Buggy Assembly kit Ultima SB Dirt Master. Buggies were created to venture off-road over rough surfaces at high speed and the Ultima SB Dirt Master is a return to the purest form of this fun and excitement.
If you want more than the entry-level model can deliver but top-end models are too focused on racing, the Dirt Master is perfect for good honest bush-bashing fun! Based on the competition-level Ultima RB5, the Dirt Master was developed as a mid-class buggy featuring high quality key performance components, at a reasonable price. The rear motor layout ensures secure rear tire grip that demonstrates rock-solid stability over low grip surfaces such as gravel and riverbeds. As the Ultima SB Dirt Master shares its racing heritage with the RB5, it is also at home on fully-fledged RC racing circuits too. With the excellent basic chassis design and a completely new body with a nostalgic flair, beginner drivers looking to step up to the next level of performance or hard-core racers looking for some fun will discover the Ultima SB Dirt Master is true to the original spirit of the buggy.
