Dash RC is proud to release the new RS-tuned Ultra Speed 13.5t Motor. Designed for extreme performance in stock class category, it uses high quality materials to guarantee for high current flow. It is housed with “arrows” cooling openings and aluminium endplate to keep the temperature and overall weight down. It comes equipped with a balanced sintered rotor to reduce unwanted vibration and to be able to withstand high temperatures. The outlaw RS-tuned ultra speed motor is designed to break limits and to set a new standard in the stock class category.
Hudy announced a side mount version of the 30mm aluminium fan, side Mount with 2 Hole, provide 3 different mounting design alternatives. Extremely reliable fan for cooling of the ESC & motor. Using the brushless design and bearing equipped, Internal soldering tabs with 200mm connecting cable to BEC connector and 60mm main cable soldered to fan.
BM Racing release the brand new 1/24 scale RWD RC drift chassis,the BMR-X PRO.
BMR-X Pro are the whole new design of the BMR-X series, simpler structural design makes the chassis install easier, more adjustable parts create more settings on your chassis, and also the BMR-X PRO 90% parts are using carbon and alum parts greatly improved the accuracy of the chassis, the BMR-X PRO will bring you to the next level of our BMR-X series.
First at all the newly designed front end are one of our highlights, Integrated design front bulkhead can effectively reduce the problem from the accuracy of installation, Slide rack steering system, easily setup caster adjustable upper arm mount design, new alum knuckles and alum front upper and lower arm.
The slide rack steering system of the BMR-X PRO can easily change the ackerman angle by switch different spacer under the rod end.
As you can see we are using the new design on the rear end of the BMR-X PRO, which is the vertically middle motor design, the weight distribution on the left and right of the chassis are more balanced, also the motor at the middle so the center of gravity move backward, which greatly improves the performance of BMR-X PRO to the old BMR-X. BMR-X PRO not only adopts a new design for the internal transmission part of the gearbox, but also the shape is also completely different from the first-generation BMR-X.
Has more adjustable holes from the new rear hub carrier and rear lower arm.
Also the BMR-X PRO have the quick release battery holder.
The BMR-X PRO are using the silver carbon parts make it looks special, the design concept comes from our Silver Wolf kit.
The BMR-X PRO only have the kits version ( not included wheels, electronics and body mount).
Mayako is proud to welcome multiple World and USA National Champion Jared Tebo to the growing Mayako Performance Community. Jared brings years of experience at the top of the industry to our community, helping all of you get the most out of your Mayako experience.
The Schumacher Eclipse cars are the current reigning 1/12th scale IFMAR World and EFRA European Champions in both modified and stock classes. The New Eclipse 5 features a extensive list of refinements, making it even faster and better handling. The Eclipse 5 is the ultimate professional LMP12 racing chassis kit. The choice of champions!
NEW – Alloy chassis design with a much shorter overall length. This allows for reduced chassis scrubbing along with a significant weight reduction from beyond both front and rear axles. These benefits allow the car to enter a corner more effortlessly and when in the corner, rotation is achieved more freely. NEW – Upgraded left and right rear hex wheel clamps to prevent any wheel wobble issues. Now perfectly true running wheels with our unique single nut rear wheels/solid axle! NEW – Servo mounting has been improved, resulting in direct mounting for the Sanwa micro range of servos such as the PGS-HR and SRG-HR. Direct and easy alignment onto the centre of the car. In doing this the chassis flexibility characteristics have been vastly improved, for performance and strength, by removing the large, off centre transverse slots previously used. All other brands of servo still can be used with the ultra-lightweight floating servo mount, included. NEW – Lightweight and flexible 3D printed rubber bumper, offering perfect body shell protection. Compared to the previous foam bumper, it is also very durable and long lasting. NEW – Black aluminium steering turnbuckles now included. Stealth and lighter weight. NEW – Updated top decks design, further reducing the polar moment of inertia. They now secure at the front within the wheelbase. NEW – The front lower beam has been improved, mounting in line with the front axle, and further reducing this forward weight, allowing for the reduced chassis length. The new beam makes use of super easy, slide in, speed secret ride height spacers. 0.5mm U7920 and 0.75mm U7921. NEW – Independent and lightweight front bumper mount makes front end assembly far easier. The front bumper can now be removed with only 2 screws. NEW – Moulded lighter weight front hub carrier design with much improved suspension action and damping characteristics. Un-sprung mass has also been reduced. NEW – Tweak free and easy LiPo mounting using new lighter weight O-ring fixing. NEW – Interchangeable front LiPo position stops with 4 equally spaced settings included. NEW – Optional 1.0° camber strap option available. 1.5° camber is included in the kit for maximum steering and lap time in most conditions. NEW – Pod offset has been refined to achieve the perfect pod balance with a wider range of modern motors. NEW – Lightweight pod carbon parts for lower centre of gravity and overall car weight. NEW – Underside Variable Chassis chamfers, offering improved ground clearance, smoother scrubbing and better clearance to curbs or other corner markers.
Not forgetting all the usual features that have made the Eclipse IFMAR World and EFRA European Champion.
Range of optional colour coded front springs.
Big Bore side and centre dampers offering long lasting damping. They also give great damping oil retention (less frequent maintenance required) and a compact and central design. Damper geometry changes have improved damping characteristics.
Lightweight pod assembly for smoother, more predictable drivability and bump handling. Strengthened for tweak prevention.
Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
Rear ride height adjusters, easier adjustment and 0.25mm height increments.
Front beam socket using O-ring fixing system.
Thread insert design making work on the car much quicker and simpler.
Easy body shell height adjustment.
Extra low rear roll centre pivot height for awesome rear traction.
Centre pivot design for easy build and maintenance, with a fully bind free design.
All black nuts as standard.
Perfectly balanced rear pod assembly.
Ultra-low motor position.
Full range of colour coded rear and side springs.
Separate springs for independent roll and bump stiffness adjustment.
Ball bearing front and rear axles.
Adjustable toe-in/out.
Chassis balance pivot holes. For use with U3582 Precision Balance Pivot Set. (Available Separately) To optimise left/right weight distribution.
Rear tweak adjustment via side springs.
Simple rear droop adjustment.
Small Kimbrough servo saver with stiffener included as standard.
High tensile steel hex screws used throughout.
High quality easy to follow instruction manual.
Range of World Championship Winning Contact RC foam tyres available.
Accepts a huge range of industry standard body shells, motors, LiPo’s and speed controllers.
Suitable for USA rules GT12 racing.
K203 – Eclipse 5 – 1/12th Circuit – Kit, Pre-Orders being taken – Due Late January 2023.
Sweep Racing has released a new 1/10 Buggy rear tyre, the Alligator. The tyre has been developed for carpet and astro turf track use and provide longer life, fast lap time. Designed low profile carcase and optimized lug pattern offers best driving feeling on the carpet track. Long-life compound are available in Yellow , Gold , Pink with open cell foam.
From the high-flying XRT and Sledge, to scaling new heights in small scale with TRX-4M, it’s been a wild ride. Now you can relive all the excitement with our Best of 2022 video. From all of us at Traxxas, we wish you a happy and safe New Year!
1/10 Towing Truck from Crossrc, Kit version, the Flatbeb supports differnet kind of 1/10 RC car, inculding touring car, Rally, Drift RC and Crawler. The WT4 tail rescue platform is equipped with an electric lifting and back sliding system, and equipped with an integrated electronic control operating system. Length 778mm, Width 297mm, Height 271mm, Wheelbase 445mm, Flatbed Length 520mm Width 279mm.
